How to Configure a Simple Static Routing in Packet Tracer

How to configure a simple static routing in packet tracer using a simple topology with two routers
here we go


Steps:

Step 1:First Create a topology like this







you will get a red light first this is configured topology

Step 2: Configure ip address to routers go to global configuration mode in R1 and R2 configure connected interfaces

In Router 1

Interface Fastethernet0/0 in global configuration mode


R1(config)#interface fastethernet 0/0
R1(config-if)#ip address 10.0.0.1 255.0.0.0
R1(config-if)#no shutdown
R1(config-if)#exit

Interface Serial 2/0

R1(config)#interface serial 2/0
R1(config-if)#ip address 20.0.0.1 255.0.0.0
R1(config-if)#clock rate 64000
R1(config-if)#encapsulation ppp
R1(config-if)#no shutdown
R1(config-if)#exit


In Router 2

Interface Fastethernet 0/0

R2(config)#interface fastethernet 0/0
R2(config-if)#ip address 30.0.0.1 255.0.0.0
R2(config-if)#no shutdown
R2(config-if)#exit


Interface Serial 2/0

R2(config)#interface serial 2/0
R2(config-if)#ip address 20.0.0.2 255.0.0.0
R2(config-if)#encapsulation ppp
R2(config-if)#no shutdown
R2(config-if)#exit


Step 3 : Assign ip address for both Pc's with appropriate ip and subnetmask and default gatewayHow ?



Step 4: Now configure both router with static route



By default Routers Know only directed connected networks here Router 1 know only 10.0.0.0 and 20.0.0.0 it doesn't know the 30.0.0.0 like this R2 doesn't know about 10.0.0.0.So We are going to add Static route to this both router

  R1(config)#ip route Destination Network| Destination N/W SubnetMask |Next Hop Address

In Router R1,Just give this command,In this case Destination is 30.0.0.0 and its subnet mask is 255.0.0.0 next hop address is 20.0.0.2


R1(config)#ip route 30.0.0.0 255.0.0.0 20.0.0.2


In Router R2


R2(config)#ip route 10.0.0.0 255.0.0.0 20.0.0.1

Thats it!!..Now both routers know all networks,check by ping ip address of host



Step 5:Double click PC move to desktop then command prompt give the command ping 30.0.0.10 in PC 0 you will get reply from 30.0.0.10 like this




From PC1





Written by